Advertisement
SECNG-I-1217
2. Never work under equipment without first properly securing the equipment to prevent it from moving or
falling. Always work on a flat and level surface.
3. Perform a visual inspection of the entire machine before each operation. Be sure all fasteners are tight and
secure, check for signs of metal cracking or fatigue, inspect for damage to electrical wiring, and inspect to be
sure proper guards are in place and secure.
4. Before operation, check grinding discs to be sure they are tight. Grinding discs loosen with use. Tighten
bolts as required.
An occasional drop ot two of oil on the wheel bearings will help prevent binding.
Page 14
EQUIPMENT DEVELOPMENT CO., INC.
MAINTENANCE INSTRUCTIONS
1. Disconnect the machine from the power source. Disconnect the supply voltage
connector at the machine on electric models before performing any maintenance. All
maintenance to be performed by qualified personnel.
800-638-3326 • edcoinc.com • techsupport@edcoinc.com
Advertisement
