Advertisement
SECNG-I-1217
ATTACHING A VACUUM / SERVICING HEAD ASSEMBLY
PROCEDURE FOR ATTACHING A VACUUM:
If using a vacuum for dust control attach it to the
vacuum port at the rear of the machine which is
on the handle as pictured above, securing it with
clamps. The port is shown in the above photo.
Page 12
EQUIPMENT DEVELOPMENT CO., INC.
800-638-3326 • edcoinc.com • techsupport@edcoinc.com
FOR LUBRICATION:
Grease fittings are now available through access
port in hood.
Advertisement
