Advertisement
SECNG-I-1217
Getting Started with your New Grinder
LEVELING:
The bubble on the machine will not necessarily be
centered once optimum operating position is achived.
It will also float back and forth during grinding. Level on
your machine may not be the same as pictured above.
Page 10
EQUIPMENT DEVELOPMENT CO., INC.
800-638-3326 • edcoinc.com • techsupport@edcoinc.com
ATTACH THE SKIRT:
Spacing approximately 1/8" off suface for best vacuum
performance
FINAL NOTE:
If you are using tools that have no directionality they
should be rotated occasionally for longer life and the
machine should be reasjusted as needed.
Advertisement
