Advertisement
Quick Links
Advertisement
Related Manuals for SImx LHT0120
Summary of Contents for SImx LHT0120
- Page 1 PIR MOTION DETECTOR INSTALLATION MANUAL LHT0119 - BLACK LHT0120 - WHITE Also in white V2.0 - 02/14...
- Page 2 TOP VIEW 180º Time Dusk SIDE VIEW 2.5m Lens Mask Less sensitive Restrict long detection Restrict short detection More Restrict RHS detection Restrict LHS detection sensitive...
- Page 3 Supplier means the authorised distributor or retailer that sold you the Goods in New Zealand or Australia; and Goods means the Simx product accompanied by this warranty and purchased in New Zealand or Australia. The benefits provided to you under the following warranty are in addition to any other rights and remedies available to you under the law: 1.
- Page 4 SECTION ONE GENERAL INFORMATION The unit utilises passive infrared technology to detect heat radiation of moving human bodies. Upon detection, the attached lighting load will illuminate for a user-determined time period. An integral daylight sensor ensures night-only operation. PARTS INCLUDED - PIR Sensor unit.
- Page 5 SECTION THREE INSTALLATION After choosing a suitable location (see previous section) install the unit as follows: The unit is suitable for connection to a 240 V ac 50Hz electricity supply. It is suggested that 3-core round flexible cable of 1mm² gauge is used. An internal switch should be installed to switch the power to the unit ON &...
- Page 6 Ensure that all connections are secure. Ensure the terminal block is attached to its mounting posts in the sensor body. Un-hook the sensor unit from the wall plate and re-attach to the wall plate box as follows:- Ensure no wires are trapped. Align the sensor centrally over the wiring box and attach the top edge of the sensor to the wall plate.
- Page 7 SECTION FOUR OPERATION AND TESTING WALK TESTING PROCEDURE The sensor will tilt forward or backward. Adjust the sensor to point in the desired direction. Set the two adjustment controls on the underside of the unit (diagram C) to the following positions: TIME - Fully anti-clockwise DUSK - Fully anti-clockwise...
- Page 8 Please see Selecting a Location for information on choosing the optimum location for your security light. *** IMPORTANT *** Simx advises and recommends that this product should be installed by a register electrician...
- Page 9 180 degree rotation of sensor head ensures accurate detection control Ceiling or eave mount Wall Mount Wiring Box fixing screw.
- Page 10 Installation aid. Clip main body onto wall plate for easier wiring Extra view shows detail of clip arrangement 1. Align top edge and "click" 2. Rotate sensor body down and “click” lower edge into place Fully tighten sensor fixing screw...
- Page 11 SECTION SIX TROUBLESHOOTING GUIDE PROBLEM SOLUTION ❏ Lamp stays ON all the time at Cover PIR lens with a thick cloth. If the light turns out, check night. detection area for heat or reflective source. If the light stays on, check wiring. See Section 3. ❏...
Need help?
Do you have a question about the LHT0120 and is the answer not in the manual?
Questions and answers