Lexus RX300 2001 Owner's Manual page 80

Programming a rolling code system
If your device is "Rolling Code" equipped, it is necessary
to follow steps 1 through 4 under the heading
R
"Programming the HomeLink
the steps listed below.
1. Locate the "training" button on the ceiling mounted garage
door opener motor. The exact location and color of the button
may vary by brand of garage door opener. Refer to the owner's
guide supplied by the garage door opener manufacturer for the
location of this "training" button.
2. Press the "training" button on the ceiling mounted garage
door opener motor.
Following this step, you have 30 seconds in which to initiate
step 3 below.
3. Press and release the vehicle's programmed HomeLink
button twice. The garage door may open. If the door does
open, the programming process is complete. If the door does
not open, press and release the button a third time. This third
press and release will complete the programming process by
opening the garage door.
The ceiling mounted garage door opener motor should now
R
recognize the HomeLink
unit and be able activate the
garage door up/down.
4. Repeat steps 1 through 3 for each remaining HomeLink
button to program another rolling code system.
Programming an entrance gate/Programming all devices
in the Canadian market
1. Decide which of the 3 HomeLink
" before proceeding with program.
2. Place your hand–held gate/device transmitter 25 to 75 mm
(1 to 3 in.) away from the surface of the HomeLink
Keep the indicator light on the HomeLink
programming.
3. Press and hold the selected HomeLink
4. Continuously press and release (cycle) the hand–held
gate/device transmitter button every two seconds until step 5
is complete.
5. When the indicator light on the HomeLink
a slow to a rapid flash after 20 seconds, you can release both
R
buttons.
6. Test the operation of the HomeLink
newly programmed button. Check to see if the gate/device
operates correctly.
7. Repeat steps 1 through 6 for each remaining HomeLink
button to program another device.
Programming other devices
To program other devices such as home security systems,
R
home door locks or lighting, contact your authorized Toyota
dealer for assistance.
2001 MY RX300_U (OM48431U)
INTERIOR EQUIPMENT
R
buttons you want to
R
.
R
in view while
R
button.
R
changes from
R
by pressing the
R
61