Engine Oil Selection - Lexus RX300 2001 Owner's Manual

62R003b
If the oil level is below or only slightly above the low mark,
add engine oil of the same type as already in the engine.
Remove the oil filler cap and add engine oil a little at a time,
checking the dipstick. The approximate quantity of oil needed
to fill between the low level mark and the full level mark on the
dipstick is indicated below for reference.
When the level reaches within the correct range, return the
filler cap and turn the cap clockwise until you hear a click.
Oil quantity. L (qt., lmp. qt.)
NOTICE
Avoid overfilling, or the engine could be damaged.
Check the oil level on the dipstick once again after
adding the oil.

Engine oil selection

Use API SJ, "Energy–Conserving" multigrade engine oil or
ILSAC multigrade engine oil.
Recommended viscosity (SAE):
Temperature range anticipated before next oil change
SAE 5W–30 is the best choice for your vehicle, for good
fuel economy, and good starting in cold weather.
If you use SAE 10W–30 engine oil in extremely low
1.5 (1.6, 1.3)
temperatures, the engine may become difficult to start, so
SAE 5W–30 engine oil is recommended.
2001 MY RX300_U (OM48431U)
ENGINE
62L005
269