Setting Operation - Lexus RX300 2001 Owner's Manual

AIR CONDITIONING
SETTING OPERATION – manual control
When one of the manual control buttons is depressed
while operating in automatic mode, the mode relevant to
the depressed button is set. Other conditions continue to
be adjusted automatically.
If manual air flow selection is desired –
20R005b
The outlets from which air is delivered can be selected
manually by pushing the button. The function of each mode is
as follows:
1 Panel – Air flows mainly from the instrument panel vents.
2 Bi–level – Air flows from both the floor vents and the
instrument panel vents.
3 Floor – Air flows mainly from the floor vents. Unheated
air is also delivered through the side vents during heating.
4 Floor/Windshield – Air flows mainly from the floor vents
and windshield vents. Unheated air is also delivered
through the side vents during heating.
146
If quick heating or cooling is desired –
Turn the "TEMP" knob until "MAX. HOT" or "MAX. COLD"
appears on the display.
When the "MAX. COLD" is selected, the air intake is
automatically set to RECIRCULATED AIR mode.
If manual fan speed control is desired –
20R006c
" 1 Toward low fan speed
The fan speed can be set to your desired speed by turning the
fan speed control button. The higher the fan speed is, the more
air is delivered. Pushing the "OFF" button turns off the fan.
To remove exterior windshield frost, use the high speed
setting.
2001 MY RX300_U (OM48431U)
2 Toward high fan speed