Table of Contents
Advertisement
EN-18
3.5.8 Expand
Set the expand functionality.
OFF
= disabled
ON
= Expands
3.5.9 End Readout
Advance to the next menu.
3.6
Mode Menu
Enter this menu to activate the desired application modes.
3.6.1 Reset
Set the Mode menu to the factory defaults.
No
= not reset.
Yes
= reset.
3.6.2 Totalize Mode
Set the status.
OFF = Disabled
ON = Enabled
3.6.3 Dynamic Mode
Set the status.
OFF
= the mode is turned off.
mMAN
= averaging and resetting are initiated manually by pressing
the FUNCTION key.
SEmMI
= averaging is automatically initiated when the display is
stable; resetting is initiated by pressing the FUNCTION key.
AUtO
= averaging is automatically initiated when the display is
stable; resetting is automatically initiated when the weight
on the display is <= 1 divisions.
When the desired status has been set, the current Level setting is displayed.
Note: Settings are 0 to 60 (integer values from 0 to 60). The default setting is Set 5.
0
= the first stable weight will be held on the display until it is reset
1
= the weight readings will be averaged for 1 second. The average
will be held on the display until it is reset.
60
= the weight readings will be averaged for 60 seconds.
The average will be held on the display until it is reset.
(display hold).
CATAPULT 5000 SERIES SCALES
Reset:
No, Yes
Totalize:
Off, On
Dynamic:
Off, On
End Mode
Exit MODE menu
dyNAmM
mMAN
semMI
auto
Advertisement
Table of Contents
