Receiving A Call; Ending A Call; Temporary Tone; Out Of Range - Southwestern Bell GH2400 User Manual

b. Move closer to base.
Note: You must be in usable range to change channels. Base antenna should
be in upright position.

Receiving a Call

1. IF THE HANDSET IS OUT OF THE BASE UNIT, press TALK or any button on the keypad.
2. IF THE HANDSET IS IN THE BASE UNIT, lift the handset.
Do not press TALK. You w i l l automatically be connected.

Ending a Call

1. Place the handset in the base or press TALK to be disconnected from the line.
3. TALK LED on handset will turn off.
Flash
Use the FLASH button to activate custom calling services such as Call Waiting or Three-Way Calling
(*Special subscription from your local telephone company required).

Temporary Tone(*)

Pulse (rotary) service users may access touch-tone features needed to operate answering machines
or use electronic banking, calling cards, etc., by pressing the TONE (*) button.
Phone will automatically return to pulse dialing after the call ends.

Out of Range

If you experience static while using the telephone, move closer to the base or change the channel
by pressing the CH(Channel) button.
Redial
Last number dialed (up to 32 digits) is stored in redial memory until another number is dialed.
1. Press TALK on handset.
2. When you hear a dial tone, press REDIAL.
Pause
A 4-second pause may be inserted into the speed dialing of telephone numbers.
Press REDIAL button at required point during storage of a number in memory.