Table of Contents
Advertisement
AIRNET CPE
Installation
Step 1:
Connect one end of your UTP or FTP
Outdoor
cat.5
Ethernet
waterproof
connector
connector located in the CPE. Then connect
the other end of the cable to the PoE
injector.
For the Netkrom PoE, the recommended
length of the Category 5 cable is up to 260
feet or 80 meters.
1.- Remove the thin enclosure nut
from the feedthru assembly. This
can be discarded. Loosen the
compression nut completely
2.- Insert the RJ45 connector thru
the feedthru assembly
3.- Tighten the compression nut
loosely to the feedthru assembly
cable
with
to
the
RJ-45
enclosure nut
feedthru assembly
compression nut
Advertisement
Table of Contents
