Wireless Point to Point
Setup
The CPE Bridge Point to Point Kit is
commonly
used
Applications.
Y
ou
ca
n
implement
c
onnection by simply setting one access point
as
RootAP in Access Point mode and setting
the other access point in Trans
mode or in Client Mode.
Follow these steps to setup RootAP
Click
on
WLAN
CONFIGURATION
menu. You will see the
sub-menus expanded under
Click on Basic.
Ensure that
The Current Mode
Access
Point.
Select
Act as
RootAP, click on the
button and reboot your device to let your
changes take effect.
in
Point-to-Point
a
Point-to-Point
parent Client
Setup
from
the
WLAN
Setup.
is set to
Apply
NOTE
• Client Mode does not provide transparent
bridging.
• Transparent Client Mode does provide
transparent bridging.