Table of Contents
Advertisement
Follow these steps to setup Transparent
Client/s.
Step 1
S
elect the
Remote AP MAC
Enter the
Remote AP
address of your Remote AP under About
system >> Wireless MAC.
Ensure that
The Current Mode
Transparent
Client.
Step 2
Select the
Remote AP MAC
Enter the
Remote AP
address of your Remote AP under About
system >> Wireless MAC
Note:
When using
Remote AP
name must also match the AP's ESSID name,
especially when Closed System is enabled on
the AP.
Repeat the Transparent Client steps to add
more Clients to the Point-to-MultiPoint
connection.
checkbox.
MAC. Check the MAC
is set to
checkbox.
MAC. Check the MAC
MAC, the
ESSID
Advertisement
Table of Contents
