Table of Contents
Advertisement
Setup Requirements
Before starting, please verify that the
following is available:
• CAT5/5e or FTP Outdoor Ethernet
cable (from the CPE to PoE Injector)
• At least one computer is installed with
a Web browser and a wired or wireless
network interface adapter
• TCP/IP protocol is installed and IP
address
parameters
configured on all your network's nodes
Important!
• Configure
and
operations first before you mount the
unit in a remote location.
• You may need to install a lightning
arrestor to protect your CPE from
lightning.
• For choosing the best location for your
CPE choose an elevated location
where trees, buildings and large steel
structures will not obstruct the antenna
signals and which offers maximum
line-of-sight propagation with the
users.
are
properly
verify
the
CPE
Advertisement
Table of Contents
