Prowax Minifit Filter - oticon miniRITE Alta2 Pro Ti Instructions For Use Manual

ProWax miniFit filter

The speaker has a white wax filter attached to the end where the
earpiece is attached. The wax filter avoid wax and debris from
damaging the speaker. If the filter becomes clogged, please replace
the wax filter or contact your hearing care professional.
Remove the earpiece from the speaker before replacing the wax filter.
IMPORTANT NOTICE
Always use the same type of wax filter as was originally supplied with the
hearing aid. If you are in any doubt about the use or replacement of wax
filters, contact your hearing care professional.
24 About Startup Handling Options Tinnitus Warnings More info
Replace ProWax miniFit filter
1. Tool 2. Remove
New
filter
Remove the tool from Push the empty pin
the shell. The tool into the wax filter in
has two pins, one the speaker and pull
empty for removal it out.
and one with the
new wax filter.
Note:
If you use a mould it requires that the hearing care professional replaces the wax filter in the speaker.
3. Insert
Final
Old
filter
Insert the new wax
filter using the other
pin, remove the tool
and throw it out.
25