Table of Contents
Advertisement
When "Fingerprint setup" screen
･
appears, tap [SET UP SCREEN LOCK] to
set unlocking method of the screen
lock ("Pattern"/"PIN"/"Password") Use
the selected unlock method if
fingerprint authentication does not
work.
When the entry screen for unlocking
･
the screen lock appears, enter the set
unlock method and then follow
onscreen instructions.
❖ Information
On the Fingerprint Manager screen, you can perform
･
the following actions:
- To rename a fingerprint, tap a registered
u
fingerprint
Enter a name
- To delete a fingerprint, tap a registered fingerprint
u
u
[DELETE]
[DELETE].
- To register the other fingerprint, tap [Add
fingerprint].
Using your fingerprint for
■
authentication
When the lock screen is displayed,
1
O
press
O
Touch
･
Swipe (or flick) up/left on the lock
･
screen to display a screen for entering
unlocking screen method you set.
u
Tap [OK].
.
with your registered finger.
❖ Information
If fingerprint authentication failed 5 times
･
consecutively, the fingerprint authentication is
disabled. Wait for a while and then perform
fingerprint authentication, or swipe (or flick) the
screen and then enter the unlocking screen method
that you set.
Setting screen unlock method
For added security, you can set your terminal
to require the entry of a pattern, PIN, or
password to unlock the screen every time the
terminal is turned on or woken from sleep
mode.
From the Home screen,
1
u
[Settings]
u
security]
[Screen lock].
Tap any of [Pattern]/[PIN]/
2
[Password].
After this step, follow the onscreen
･
instructions.
If you select "PIN", enter 4 to 16 numeric
･
characters. If you select "Password",
enter 4 to 16 alphanumeric characters.
The "PIN" differs from the PIN code set
･
for your docomo nano UIM card (P.174).
u
[Lock screen &
Settings
177
Advertisement
Table of Contents
