Table of Contents
Advertisement
Setting an access point
An access point for connecting to the
Internet (sp-mode) is already registered. You
can add or change it if necessary.
For details of sp-mode, refer to NTT DOCOMO
website.
https://www.nttdocomo.co.jp/service/
spmode/ (in Japanese only)
For using mopera U and Business mopera
Internet, add the access point manually.
For details on mopera U, refer to mopera U
website.
https://www.mopera.net/ (in Japanese only)
Checking the access point in use
From the Home screen,
1
u
[Settings]
u
networks]
It is recommended that you use the
･
displayed access point without editing.
❖ Information
Radio button on the right of current access point is
･
marked.
u
u
[More]
[Mobile
[Access Point Names].
Setting an access point additionally
From the Home screen,
1
u
[Settings]
u
networks]
Tap
.
2
u
[Name]
Enter a name
3
u
[APN]
Enter an access point name
4
u
[OK].
Tap and enter all other
5
information required by your
network operator.
u
[Save].
6
❖ Information
Do not change the MCC/MNC when setting the APN.
･
If you change them to values other than the default
values (440/10), the set APN will not be displayed on
the APN screen. If the set APN is not displayed,
u
Step 2
Tap [Reset to default] or
APN again.
Initializing an access point
From the Home screen,
1
u
[Settings]
u
networks]
u
[Reset to default].
2
u
u
[More]
[Mobile
[Access Point Names].
u
[OK].
, then set the
u
u
[More]
[Mobile
[Access Point Names].
Settings
in
163
Advertisement
Table of Contents
