Aercus Instruments WeatherSleuth Manual page 20

Figure 19
You are now communicating directly to the WeatherSleuth® and can proceed to Section 3.6.5.
If you cannot access the device, press the reset pinhole on the back of the module (reference Figure 15)
and wait for the lights to stabilise, and repeat by selecting the Search button again.
MAC Users
To find the WeatherSleuth® receiver, launch the IP Tools application on the CD that came with your
station or you can download it here:
www.aercusinstruments.com/downloads/
The HostIP (your computer's IP address) will be displayed as below:
Figure 19a
Aercus Instruments™ - WeatherSleuth® 20 | P a g e