Xerox Phaser 8400 Service Manual page 23

Hide thumbs Also See for Phaser 8400:
Table of Contents

Advertisement

Phaser 8400/8500/8550/8560 Color Printer Service Manual
POST Error Reporting Blink Pattern Definition Table (Continued)
8400
PS, PE and Control
Error
Panel LEDs (for
Code
8400)
6.08
N/A
07.01
Flutter only
07.02
Flutter only
08.01
Flutter only
09.01
Flutter only
10.01
Flutter then 10 blinks
10.02
Flutter only
11.01
Flutter then 11 blinks
11.02
Flutter then 11 blinks
11.03
Flutter then 11 blinks
11.04
Flutter then 11 blinks
12.xx
Flutter only
13.01
Flutter then 13 blinks
13.02
Flutter then 13 blinks
14.xx
Flutter then 14 blinks
15.01
Flutter then 15 blinks
15.02
Flutter then 15 blinks
15.03
Flutter then 15 blinks
POST
Error
Type
Description
Soft
IDE drive general failure. Reseat IDE
cable and power cable. If problem
persists, replace the IDE drive. The
printer will work without the IDE drive.
Soft
Control Panel link is invalid or bad
parity.
Soft
Control Panel version mismatch.
Soft
Control Panel failed to initialize.
Soft
Control Panel data path failure.
Hard PLD power control link down.
Soft
PLD power control link invalid,
mismatch error.
Hard EEPROM read failure.
1. Check EEPROM orientation.
2. Replace EEPROM.
Hard EEPROM write failure.
1. Check EEPROM orientation.
2. Replace EEPROM.
Hard EEPROM re-read failure.
1. Check EEPROM orientation.
2. Replace EEPROM.
Hard EEPROM data failure, mismatch error.
1. Check EEPROM orientation.
2. Replace EEPROM.
Soft
Configuration card test failure.
1. Check card orientation.
2. Reseat then replace the
configuration card.
NOTE Printer will work as a base model
(without networking) without the
configuration card (8400 only).
Hard PHY reset failure, reset stuck low.
Hard PHY ID error, mismatch error.
Hard USB errors, N2280 netchip read, write,
and mismatch errors, POST hard
errors.
Hard CPU interrupt error.
Hard CPU interrupt error, missing CPU
interrupts.
Hard CPU interrupt error, IRQ spurious
assertion.
Error Messages and Codes
8500/
8550/8560
Error Code
6.808
16.1
16.2
16.3
16.4
33.1
33.2
12.1
12.2
12.3
12.4
2.1
2.2
19.1
19.3
19.4
19.5
3-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 8550Phaser 8560Phaser 8500

Table of Contents