Getting Started - Ericsson R280d User Manual

Getting Started

Connecting and Removing Your Battery
1 Place the battery over the back of
the phone. The label on the battery
should face down. Insert the top
portion of the battery into the
phone. The tab on the bottom of
the battery should be pointing
toward the bottom of the phone.
2 Press down until you hear a click.
The battery is now connected.
3 Remove the battery by pushing in
on the tab of the battery with your
thumb.
4 Then, lift the battery up and out of
the battery cavity.
Getting Started
Charging Your Battery
Your Charger
Your phone was packaged with
either a rapid or travel charger. It is
important that you fully charge
your battery before you use your
phone. Both chargers supply
power to charge your battery while
the battery is attached to your
phone. If your phone is On, it can
receive calls while using either
charger.
Note! attach the charger to a
I@W@S
phone that does not have a battery
installed.
1 If you have a rapid charger, plug the charger into a
standard wall electrical outlet. If you have a travel
charger, connect the appropriate AC power cord and
phone charging cord to the travel charger.
2 Hold the phone with the display and keypad facing
up.
7