ProForm 831.288080 User Manual page 7

8. Hold the Rear Stabilizer (3) under the Carriage Bar
(7) in the position shown. Attach the Rear Stabilizer
to the Carriage Bar with three M8 x 100mm Button
Bolts (63) and three M8 Washers (55).
9. Insert the lower end of the Backrest Frame (8) into
the Seat Frame (27). Attach the Seat Frame and the
Backrest Frame to the Seat Carriage (11) with four
M8 x 38mm Button Bolts (24).
10. Slide a Seat Handle (61) onto one side of the
Backrest Frame (8). Attach the Seat Handle with
two M6 x 38mm Button Bolts (14) and two M6 Nylon
Locknuts (15).
Attach the other Seat Handle (not shown) to the
other side of the Backrest Frame (8).
11. Attach the Seat (12) to the Seat Frame (27) with
four M6 x 22mm Button Screws (29) and four M8
Washers (55).
8
63
55
7
9
27
11
10
11
12
7
63
55
3
24
24
15
14
61
55
29
8
8
27