Setting The Clock; Setting The Alarm Clock - DIGITECH Audio S450 Owner's Manual

SETTING THE CLOCK

The clock works in either the 12 hour or 24 hour mode.
To change the clock from one mode to another, turn the radio o ,
press and hold the UP button for 5 seconds.
To set the clock:
1. Turn radio o .
2. Press and hold the T.SET button until the hour starts flashing.
3. Turn the tuning knob in either direction or press the UP button
to set the hour.
4. Quick press the DOWN button to make the minutes flash and turn
the tuning knob to set the minutes
5. Quick press the T.SET button to finalize the entry.
Do the above steps quickly or the time set mode will exit.
If it exits, simply start over.

SETTING THE ALARM CLOCK

There are two alarm clocks, Timer A and Timer B.
1. Turn the radio o .
2. Press and hold the TIMER A or TIMER B button until the hour flashes.
3. Turn the tuning knob in either direction or press the UP button to set
the hour.
4. Quick press the DOWN button to make the minutes flash and turn
the tuning knob to set the minutes.
5. Quick press whichever button you are using, TIMER A or TIMER B, to
finalize entry.
12