Using The Snooze Feature; Using The Earphone Jack - DIGITECH Audio S450 Owner's Manual

ACTIVATING AND DEACTIVATING
THE ALARM CLOCK
Press and release the TIMER A or TIMER B button. 'Timer A' or 'Timer
B' ashes in the display. While it ashes, press ALARM over and over.
A bell " ," speaker
'Timer A' or 'Timer B'. Select the bell icon to activate the alarm and
set the alarm to go o with a beeping sound. Select the speaker icon
if you wish to wake up to the last radio station tuned to. If nothing is
selected the alarm will be deactivated. Set the volume to a level you
want to hear.

USING THE SNOOZE FEATURE

To delay the alarm, the snooze feature can be activated by pressing the
SNOOZE button when the alarm turns on. Once pressed, the alarm will
activate again in 5 minutes. This can be repeated up to 4 times.
USING THE LINE IN/OUT SOCKETS
These sockets are on the right side , an 1/8 inch stereo type (3.5 mm).
An external audio device (such as an MP3 player) can be played by
connecting an AUX line from the device into the Line-In socket.
The Line-Out socket can be used to feed audio to ampli ed external
speakers.

USING THE EARPHONE JACK

The earphone jack can be used with stereo headphones using an 1/8
inch (3.5 millimeter) plug. FM sound is in stereo if the signal is sent in
stereo and the ST position is selected with the BANDWIDTH switch.
or nothing appears in the display next to
13