Statistics - TRENDnet TEG-40080ES User Manual

TRENDnet User's Guide

Statistics

Statistics provide important information for troubleshooting switch problems at the port
level. The Switch Management page provides one statistics charts for monitoring Traffic
Information
View Traffic Information Statistics
Statistics > Traffic Information
1. Log into your switch management page (see
on page 7).
2. Click on Statistics and click on Traffic Information
3. View the Traffic Information Statistics.

Tx – Displays the total number of bytes transmitted per port.

Rx – Displays the total number of bytes received per port.

Clear Counter – Clears the Traffic Information and resets the counter.

Refresh – Refreshes the Statistics table with the updated Traffic Information.
© Copyright 2017 TRENDnet. All Rights Reserved.
"Access your switch management page"
Switch Maintenance
Upgrade your switch firmware
TRENDnet may periodically release firmware upgrades that may add features or fix
problems associated with your TRENDnet switch model and version. To check if there is
a firmware upgrade available for your device, please check your TRENDnet model and
version using the link. http://www.trendnet.com/downloads/
In addition, it is also important to verify if the latest firmware version is newer than the
one your switch is currently running. To identify the firmware that is currently loaded on
your switch, log in to the switch, click on the System Info section or click on Tools and
click on Firmware Upgrade. The firmware used by the switch is listed as Runtime Image
or Image Version. If there is a newer version available, also review the release notes to
check if there were any new features you may want or if any problems were fixed that
you may have been experiencing.
1. If a firmware upgrade is available, download the firmware to your computer.
2. Unzip the file to a folder on your computer.
Please note the following:
 Do not interrupt the firmware upgrade process. Do not turn off the device or
press the Reset button during the upgrade.
 If you are upgrade the firmware using a laptop computer, ensure that the laptop
is connected to a power source or ensure that the battery is fully charged.
 Disable sleep mode on your computer as this may interrupt the firmware upgrade
process.
 Do not upgrade the firmware using a wireless connection, only using a wired
network connection.
 Any interruptions during the firmware upgrade process may permanently
damage your switch.
TEG-40080ES
21