Table of Contents
Advertisement
TRENDnet User's Guide
Set Port-Based QoS
Bridge > QoS > Port-Based QoS
The Port-Based QoS mode allows users to change priority port settings for all available
ports. This setting supports four Queues (Queue 0, Queue 1, Queue 2, Queue 3), all of
which hold different weights. Ports handling high priority traffic, such as video or voice
application, can be assigned higher priority queues (Queue 3) for optimized
performance.
1. Log into your switch management page (see
on page 7).
2. Click on Bridge and select QoS
3. Change QoS Mode Setting to Port-Based QoS.
3. For each port, select a Queue in the Priority Settings. Click Apply to save the settings.
© Copyright 2017 TRENDnet. All Rights Reserved.
"Access your switch management
page"
5. Change the Scheduling Method Settings to define the hierarchy and parameters for
the QoS Mode application. Click Apply to save the settings.
•
Weighted Round Robin - The port transmits a set number of packets from each
queue, in a round robin fashion, so that each has a chance to transmit traffic.
•
All-High-Before-Low - The port transmits all packets out of higher priority
queues before transmitting any from the lower priority queues.
6. Click Apply to save configuration changes to the NV-RAM to ensure that if the switch
is rebooted or power cycled, the configuration changes will still be applied.
TEG-40080ES
20
Advertisement
Table of Contents
