System - TRENDnet TEG-40080ES User Manual

TRENDnet User's Guide
System MAC Address, IPv4 Information
 MAC Address: Displays the switch system MAC address.
 IP Address – Displays the current IPv4 address assigned to your switch.
 Subnet Mask – Displays the current IPv4 subnet mask assigned to your switch.
 Default Gateway – Displays the current gateway address assigned to your switch.
IPv6 Information
 IPv6 Address: Displays the current IPv6 address and prefix assigned to your
switch.
Automatic Network Features
 IPv4 DHCP Client Mode: Displays if your switch IPv4 address setting is set to
DHCP client.
© Copyright 2017 TRENDnet. All Rights Reserved.

System

Set your system information
System > System Management
This section explains how to assign a name for the switch. This information helps in
identifying each specific switch among other switches in the same local area network.
Entering this information is optional.
1. Log into your switch management page (see
on page 7).
2. Click on System
3. Review the System Management settings. When you have completed making
changes, click Apply to save the settings.

System Description - Specifies the switch model. You cannot change this
parameter.

System Name - Specifies a name for the switch, the name is optional and may
contain up to 15 characters.

Link Ports - Specifies the ports with an established link.

Bonjour – A discovery protocol that enables automatic discovery of services
and devices within the IP networks. Bonjour is disabled by default.
4. Click Apply to save configuration changes to the NV-RAM to ensure that if the switch
is rebooted or power cycled, the configuration changes will still be applied.
TEG-40080ES
"Access your switch management page"
8