Silvercrest SBW 60 A1 Operation And Safety Notes page 34

Placement and mounting
Wall Mounting (option-A)
Place Soundbar on a level surface in front of TV.
Wall Mounting (if using option-B)
Remove the screws from the main unit.
Drill 2 parallel holes (Ø 3-8 mm each according
to wall type) in the wall. The distance between
the holes should be 760 mm.
Leave a 5 mm gap between the wall and the screw's head. Lift the unit with the attached wall
brackets over the heads of the screws and slot into place.
34 GB/IE
Option - A
Attach the wall brackets to the main unit with
the screws removed from the main unit.
Firmly fix 1 dowel into each hole in the wall
if necessary.
Dowel
Option - B
Solid wall (i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
0.1-0.2 inch
(3-3.5mm)
0.2 inch
(5mm)
> 1 inch
(25mm)