Iiyama ProLite XB3270QS User Manual page 16

Picture
Adjustment Item
1,2
Brightness *
2
Contrast *
Sharpness
2
Overdrive *
2
Adv. Contrast *
2
ECO Mode *
2
Blue Light Reducer *
X-Res Technology
1
* Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
2
* See page 17 for Disabled function matrix.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button operations.
 Blue Light Reducer: Pressing and holding of the SELECT Button for about 2 seconds when the
Menu is not displayed.
12 OPERATING THE MONITOR
Problem / Option
Too dark
Too bright
Too dull
Too intense
You can change the picture quality from 0 to 100
(soft to sharp).
Press the
numerical order. Press the
picture quality in reverse numerical order.
Adjust the picture quality at resolutions of less
2560 × 1440.
You can change the picture quality.
Off / -2 / -1 / 0 / +1 / +2
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
On Increased Contrast Ratio
Off Typical Contrast Ratio
Off Normal
1 Brightness of back-light is reduced.
2 Brightness of back-light is reduced more than 1.
3 Brightness of back-light is reduced more than 2.
Typical
Off
1 Blue light is reduced.
Direct
2 Blue light is reduced more than Mode1.
3 Blue light is reduced more than Mode2.
Off Normal
Soft Enhance the picture edge.
Middle
Enhance the picture edge more than the Soft option.
Hard Enhance the picture edge more than the Middle option.
Button to change the picture quality in
Button to change the
Button to Press