Programming The Controller - Hunter ICC-800PL Owner's Manual And Installation Instructions

PROGRAMMING THE CONTROLLER ...................................................................................

Two key features of the ICC that make programming a snap are its clear,
easy-to-read LCD display and its easy-to-use dial design.
The ICC display shows time and day when the controller is idle.
The display changes when the dial is rotated to indicate the specific
programming information to enter. When programming, the flashing
portion of the display can be changed by pressing the
To change something that is not flashing, press
field is flashing.
The ICC controller offers maximum scheduling flexibility including
four programs, each with up to 8 daily start times, permitting plants
with different watering requirements to be separated on different day
schedules. Multiple start times permit morning, afternoon and evening
watering, perfect for the establishment of new lawns and thirsty annual
flowers. A built in 365-day calendar clock accommodates odd/even
watering restrictions without requiring monthly reprogramming.
Or, just simply designate the days of the week you want to water or use
the convenient day interval watering. The ICC makes it easy.
ALL STATIONS
24
or buttons.
or until desired
PROGRAM
NOTE: A basic programming rule is that whatever
symbol or character is flashing will be the item
programmed. For instance, if the hour is flashing
when setting the time, the hour can be changed or
programmed. For illustration purposes, flashing
characters are in
Date And Time
To activate a program in your controller, you must enter the following
information:
1. Set current day and time – turn dial to SET CURRENT DATE/TIME.
2. Set what time of day you would like the program to start – turn dial to
SET PROGRAM START TIMES.
3. Set how long each valve will water – turn dial to SET STATION
RUN TIMES.
4. Set the day(s) you would like the program to water – turn dial to
SET DAYS TO WATER.
NOTE: All stations operate in numerical order. Only
one program start time is required to activate all
stations in the watering program.
GRAY type. Setting The Current