Antenna Attachment - Gemtek Systems WUBR-177G User Manual

2. Antenna Attachment

This chapter contains instructions for antenna installation.
Note: If you have already attached the antenna to your PC, please skip to
Chapter 3.
Please find a connector at one end of the antenna cable. Screw this connector (A) to the
1.
matching antenna receptable (B) located at the back of the computer chassis.
Figure 1: Antenna Attachment
2. Place the antenna in an elevated and open area for optimal wireless performance.
3. You can optionally use the 'attachment pad' which comes with the accessory kit to make
your antenna base stick to any flat surface. Avoid using the front panel of your computer to
stick the antenna
7 USB Wireless 802.11 b/g Adaptor
Antenna Attachment