Wpa: Setting The Network Key (Network Security) - Gemtek Systems WUBR-177G User Manual

4.3.2 WPA: Setting the Network Key (Network Security)

This section gives instruction on how to correctly set up WPA security on your HP PC. If you
are currently running a WEP enabled device, return to Section 4.3.1, WEP: Setting the Net-
work Key (Network Security).
In order to set up your Network Key (WPA security feature) you will need to do the following:
1. Open the Wireless Network Connection Properties dialog box:
Right click on the Wireless Networks icon in the system tray.
Select View Available Wireless Networks from the Wireless Networks icon menu.
The Wireless Network Connection dialog box appears.
Select Change advanced settings on the left side of the dialog box.
The Wireless Network Connection Properties dialog box appears.
Select the Wireless Networks tab as shown in figure 12 below.
Figure 12: Wireless Network Connection Properties dialog box
18 USB Wireless 802.11 b/g Adaptor
WindowsXPWireless Zero Configuration