Figure 11: Wireless Network Properties Dialog Box - Gemtek Systems WUBR-177G User Manual

Figure 11: Wireless Network Properties dialog box

3. Input your Network name (SSID).
4. Uncheck the box "The key is provided for me automatically".
5. Verify that the Network Authentication is set to Open.
6. Verify that the Data Encryption is set to WEP.
7. Input the Network Key of your Access Point, Wireless Broadband Router or Wireless
Gateway.
Note: Either a HEX or ASCII format is necessary when using the WEP
interface. Your WEP enabled device should already have either HEX or
ASCII format pass-phrase associated. Consult the information asked for in
section 4.2.
HEX: 10 characters in HEX notation for 40 bit, or 26 characters for 128 bit.
ASCII: 5 characters for 40 bit, 13 characters for 128 bit.
8. Input the Network Key a second time into the Confirm network key box.
9. Select OK.
You are returned to the Wireless Network Connection Properties dialog box and are able
to verify your connection.
17 USB Wireless 802.11 b/g Adaptor
WindowsXPWireless Zero Configuration