Figure 4: Wireless Network Connection Dialog Box - Gemtek Systems WUBR-177G User Manual

The Wireless Network Connection dialog box will appear as shown below.

Figure 4: Wireless Network Connection dialog box

5. Enter your Network Key (WEP Key or WPA Key) for your Wireless Network.
6. Input the Network Key a second time into the "Confirm network key" field.
Note: If your network is using WEP encryption, then a HEX or an ASCII
format is necessary when entering your Network Key:
HEX: 10 characters in HEX notation for 40 bit or 26 characters for 128
bit encryption.
ASCII: 5 characters for 40 bit or 13 characters for 128 bit encryption.
If your network is using WPA it is necessary to enter an 8 – 63 character
alphanumeric key-phrase.
The Network Key will accept any of these as it supports both WEP and
WPA.
7. Select Connect.
The Wireless Network Connection dialog box appears as you are being connected.
Figure 5: Connecting to Wireless
11 USB Wireless 802.11 b/g Adaptor
WindowsXPWireless Zero Configuration