Figure 13: Wireless Network Properties Dialog Box - Gemtek Systems WUBR-177G User Manual

2. Select Add under the Preferred networks selection box.
The Wireless Network Properties dialog box appears as shown in figure 1

Figure 13: Wireless Network Properties dialog box

3. Uncheck the box "The key is provided for me automatically".
4. Verify that the Network Authentication is set to WPA-PSK.
5. Verify that the Data Encryption is set to TKIP or AES.
6. Input the Network Key of your Access Point, Wireless Broadband Router or Wireless
Gateway.
Note: A 8 – 63 character alphanumeric key-phrase is necessary when using
the WPA interface. WPA does not require HEX or ASCII notation which
is common with WEP keys. Your WPA enabled device should already
have a 8 – 63 character alphanumeric key-phrase. Consult the informa-
tion asked for in Section 4.2.
7. Input the Network Key a second time into the "Confirm network key" box.
8. Select OK.
You are returned to the Wireless Network Connection Properties dialog box and are able
to verify your connection.
19 USB Wireless 802.11 b/g Adaptor
WindowsXPWireless Zero Configuration