Setting The Network Key Manually - Gemtek Systems WUBR-177G User Manual

After connection to a wireless network is established, a Wireless Network Connection dialog
box, as shown below will appear
Figure 6: Wireless Network Connection dialog box

4.3. Setting the Network Key Manually

After launching the application (See Section 4.1, Launching the application) you will need to
input the Network name and Network Key. The Network name and Network Key must both be
set up for your HP PC to function with your current network in Station Mode.
Before manually setting up the Network name and Network Key on your HP PC you must
identify this information on your current wireless network:
Network name (SSID)
Security WPA-PSK Key OR Security WEP Key
The Wireless Network Connection dialog box appears when you have launched
WindowsXP Wireless Zero Configuration:
12 USB Wireless 802.11 b/g Adaptor
WindowsXPWireless Zero Configuration