Items Supplied With The Test Stand - Macmesin MultiTest–xt Assembly And Installation Manual

System test stands
Table of Contents

Advertisement

1. Items Supplied with the Test Stand

1.1 MultiTest-xt test stand
1. Test stand
2. Console fitted with arm, power cable and USB cable
3. Tools to fit the console to the test stand
4. CD with software and manuals for backing up or running on a PC
5. Assembly and Installation guide (this manual)
6. Translation of 'A Guide to the Safe Use of Mains Powered Test Frames' (does not
apply to English speaking countries, or countries outside European Union)
7. Adjustable handle lever to secure loadcell to crosshead
8. Appropriate mains cables for test stand and console
9. Allen keys and Torx wrenches
10. Four rubber feet, four attachment screws and Allen key (if applicable)
11. Four base anchoring brackets, (if applicable)
12. Adaptors (if applicable)
1.2 Vortex-xt test stand
1. Test stand
2. Console fitted with arm, power cable and USB cable
3. Intelligent Torque Cell (ITC), as an integral part of the crosshead
4. CD with software and manuals for backing up or running on a PC
5. Start-up guide
6. Translation of 'A Guide to the Safe Use of Mains Powered Test Frames' (does not
apply to English speaking countries, or countries outside European Union)
7. Appropriate mains cables for test stand and console
8. Allen keys and Torx wrenches
Assembly and Installation of –xt System Test Stands
Mecmesin  1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vortex-xt

Table of Contents