Macmesin MultiTest–xt Assembly And Installation Manual page 3

1. Items Supplied with the Test Stand
1.1 MultiTest-xt test stand
1.2 Vortex-xt test stand
2. Installation
2.1 Unpacking the stand
2.2 Lifting the test stand
2.3 Locating the stand
2.4 Mains power supply
3. MultiTest-xt Assembly and Installation
3.1 Bolting the test stand to the work surface
3.2 Fitting the feet to the stand
3.3 Fitting the console to a single column test stand
3.4 Fitting the console to a twin-column stand
3.4.1
3.5 Fitting the loadcell to the crosshead
3.6 Swapping loadcells
3.7 Attaching grips and fixtures
3.8 Setting the limit stops
4. Vortex-xt Assembly and Installation
4.1 Fitting the console to the Vortex-xt
4.2 Fitting the crosshead to the Vortex-xt
4.3 Connecting the intelligent torque cell
4.4 Swapping intelligent torque cells
5. Connecting the Console (MultiTest-xt and Vortex-xt)
5.1 Connecting the console power lead and USB lead
5.2 Switching on the system
5.3 Connecting other devices
5.4 Emergency stop button
5.5 Jog buttons
5.6 The touch screen console
5.7 Operators and Master users
Assembly and Installation of –xt System Test Stands
Contents
Twin column stands with guards
1
1
1
2
2
2
2
2
2
3
4
4
5
6
7
8
8
9
11
11
11
12
13
14
14
14
15
15
15
15
16
Mecmesin  iii