Table of Contents
Advertisement
Remember to check and, if necessary, adjust the position of the limit stops if the grips are
exchanged for a different holding accessory.
Limit stops on a MultiTest 1-xt. Stops on other stands all operate in the same way.
Twin-column stands have system limit stops as well as limit stops. System limit stops
should not be moved. In an emergency, to release a trapped sample the system limit can
be moved, but if you do so, you must contact your Mecmesin distributor for servicing
and re-setting. These stops are designed for protection from damage, and moving them
may affect your warranty on the stand.
Lower limit stop and system limit stop on a twin-column stand
10 Mecmesin
Assembly and Installation of –xt System Test Stands
upper and lower
limit stops
The crosshead will stop when
it reaches this position
Lower limit stop
System limit stop
Advertisement
Table of Contents
