Advertisement
Adjust the image
1
If you don't see an image, press the Source buttons on the projector or
the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, adjust the front feet as shown below.
3
Turn the zoom ring to reduce or enlarge the image.
4
Turn the focus ring to sharpen the image.
5
If your image looks like
one side of the screen at an angle. Use the horizontal keystone slider on
the projector to correct it. Or place the projector directly in front of the
center of the screen, facing the screen squarely.
6
Your projector automatically adjusts images that look like
but if necessary you can press the
correct this.
or
, you've placed the projector off to
or
or
button on the projector to
Using the remote control
Insert two batteries as shown (two AA batteries).
Turn projector on
Switch between
2D and 3D
Access projector
menus
For more information on using the remote control, see the User's Guide.
Viewing 3D images
To view 3D content, you must first connect a 3D-compatible video device to
one of the HDMI ports on your projector. You will also need a pair of Epson or
Epson-compatible 3D active shutter glasses.
1
Turn on and begin playback on the 3D-compatible video device.
2
Press the
button on the projector remote control, if necessary.
3
Press and hold the power button on your 3D glasses for at least one
second.
,
See the User's Guide for more information on adjusting the 3D images.
Turn projector off
Choose which source
to display
Navigate projector
menus
Turn off projector
display
Advertisement
