How To Use High Flow Inflator/Deflator Adapter Body - Husky 41004 Operator's Manual

How to use High Flow
Inflator/Deflator Adapter Body
1. Assemble the high flow
inflator/deflator body as
described in the Assembly
section.
2. Choose nozzle to be used to
inflate or deflate. NOTE: The seal
ring may be used with any of the
nozzles to prevent air from leaking
out of inflatables with very large air
inlets.
3. The high flow inflate/deflate
adapter body attachment has an
"inflation" outlet and "deflation"
outlet. Attach the nozzle to the
preferred outlet. NOTE:
"Inflation" and "Deflation" are
marked at outlets.
4. Insert nozzle into inflatable and
then start inflator, see "How to Start"
paragraph.
NOTE: If inflatable is not getting firm
enough, place thumb over the
"deflation" outlet to allow air to go
directly into the inflatable.
Risk of Bursting. DO NOT over-inflate.
Keeping thumb over "Deflation"
outlet could cause inflatable to
over-inflate. Use caution when
placing thumb over "Deflation" outlet.
15