NEC SV8300 User Manual page 8

CALL PICK UP
1. Pick up your phone and receive extension dial tone.
2. Press the DPICK soft key and hear interrupted dial tone.
3. Type the extension that you want to answer – the call is now connected.
CALL DISPLAY
To gather caller information from your display, push the line button that you are on
(while talking) and the information (caller name and number) will re-appear on your
display.
HOT DESKING (only applicable for IP telephones)
1. Press the ―Speaker‖ button
2. Press the ―LOG IN/OUT‖ button on the telephone
3. The display will then prompt for Login: and Password:
4. Enter your extension number from the dial pad and then the ―Set‖ soft key
5. Enter the password of 1234 (this is the same for all extensions) and then the
―OK‖ soft key
NOTE: When visiting another site or Hot-Desking in a meeting room-
please remember to LOGOUT before you leave
NOTE: When you logout from the visitors location your extension will
then revert back to its originally assigned location
NOTE: If your extension is already registered the display will read
"Over-Ride" Select "Yes" to proceed
PROGRAMMING STATION or PERSONAL SPEED DIAL
From the idle state, press the STA soft key.
Use the PREV or NEXT soft keys to select the entry number (00-19) to be pro-
grammed.
Press the ENTRY soft key to search the vacant memory block of Station Speed Dial.
Press the NAME soft key to enter a new name.
Enter the desired name (up to 16 characters using the letters on Keys 2 through 9)
Press the SET soft key to save
Press the NUMBER soft key to enter the number associated with the name. Dial 9 +
the desired telephone number.
Press the SET soft key to save
Press OK to continue programming additional Speed Dials
TO USE STATION (PERSONAL), OR SYSTEM (GLOBAL)
SPEED DIALS
From the idle state, press the STA , SYS or DIR soft key on your phone.
To search by name, enter up to the first four characters of a name using the keypad.
Press the PREV or NEXT soft key to start the search.
The name and the number are shown on the LCD. If more than one name matches
the letters entered, scroll through the hits with the PREV or NEXT soft keys.
Once the name and number are displayed either press the SPEAKER key, the line
key, or lift the receiver to place the call.
16
17