Clearing [View Only Mode] - Fujitsu fi-600F Operator's Manual

Chapter 7 Operational Settings

Clearing [View Only mode]

Clear [View Only mode] in the following procedure.
1
Right-click the Software Operation Panel icon in the
notification area, and select [View Only mode] from the
menu.
 The [Password setting] window appears.
2
Enter the current password and click the [OK] button.
 [View Only mode] is cleared, and the scanner settings can now be
changed.
ATTENTION
When multiple scanners are connected and when one of the
scanners exits view only mode on the Software Operation Panel,
scanner settings on the Software Operation Panel for all scanners
can be changed.
HINT
When you exit [View Only mode], the check mark next to [View
Only mode] disappears from the menu that is displayed by right-
clicking the Software Operation Panel icon in the notification area.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Scan
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Appendix
Glossary
62