Settings - Fujitsu fi-600F Operator's Manual

Chapter 4 Various Ways to Scan
4.2 Scanning Documents of Different Types and Sizes
Scanning a Book
1
Open the document cover.
For details, refer to "1.4 Opening/Closing the Document Cover" (page
18).
2
Place a document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
Reference Point
ATTENTION
Take note of the following:
 A curled or folded document may create a small gap between
the document and the document bed, causing the scanned
image to be blurred.
 When the document cover is open, light from external sources
such as fluorescent lamps may pass through a document and
affect the brightness of the scanned images. The effect is
stronger for thinner documents. In such cases, close the
document cover before scanning.
3
Gently close the document cover.
For details, refer to "1.4 Opening/Closing the Document Cover" (page
18).
4
In the scanner driver, configure the scan settings for using
the flatbed.
For details, refer to the scanner driver's Help.
5
Scan the document with the image scanning application.
For details, refer to the image scanning application manual.
Do not look directly into the light source.
CAUTION
ATTENTION
Do not move the document during scanning.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Scan
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational

Settings

Appendix
Glossary
32