Quick Cooling; Door Alarm And Eco Alarm Functions; To Disactivate Alarm And Sound; To Re-Activate Alarm And Sound - Hitachi R-M800GP2M Instruction Manual

How to Use Glass Touch Panel
Others Function

"Quick Cooling"

When you want to cool food or drinks quickly, use this function.
1. Put food on the quick cooling corner.
"Quick Cooling" corner is located
on the upper part of the refrigerator
compartment.
"Quick Cooling"is more effective if food is placed
near the back wall of the refrigerator compartment.
Notice
During defrost period,"Quick Cooling "operation will stop even when the lamp is on.
After finishing its period, the operation will restart automatically.
Please note "Quick Cooling " mode will be released after power cut off or unplug.

Door Alarm and ECO Alarm Functions

If the door is left open for more than 1 minute, the alarm system will inform the user by the sound and digital display.
Door Alarm: Informs by
Eco Alarm Display: Indicates the door opening state on the control panel.
Duration of Door Opening
After 1 minute
After 2 minute
After 3 minute
Notice
If the freezer door opens, OP F is displayed, the refrigerator door opens,
OP R , the vegetable compartment opens, OP V
All alarm functions (Door Alarm and Eco Alarm Display ) and each button operation sound can be disactivated.

To Disactivate Alarm and Sound

1. Keep pressing "Quick Freezing"
button for approximately 5
seconds until the sound of
"Peep!" is heared.
Pi!
Freezing
1,2,3,4,5 Seconds
Peep!
Notice
Upon shipment, the alarm and sound are set "ON".
In case of Door Alarm, Eco Alarm Display and each button operation sound was disactivated. If we unplugging and inserting
the power plug or in the event of a power failure the refrigerator will still set the alarm and sound to "OFF".
10
(Continued)
2. Touch "Quick Cooling" button
to start Operation.
Peeppeeppeep
sound.
Door Alarm Sound ECO Alarm Display
Peeppeeppeep
Displays OP F/R/V.
Peeppeeppeeppeeppeep
Displays OP F/R/V.
Peeps continuously. Displays OP F/R/V.
Lamp lights on.
Lamp lights off.
Pi!
Lamp lights on.
is displayed respectively.

To re-activate Alarm and Sound

1. Keep pressing "Quick Freezing"
button for approximately
5 seconds until the sound of
"Pipi!" is heared.
. . . .
Freezing
1,2,3,4,5 Seconds
Pipi!
3. To stop this function before it
is completed, touch
"Quick Cooling" again.
Pipi!
Lamp lights off.
"Quick Cooling" will be finished
automatically in approximately
90 minutes.
Pipipipi!
Lamp lights off.
Peeppeeppeep!
Lamp lights on.
Lamp lights off.