Table of Contents
Advertisement
•
set network parameters and settings approved by the Save button...
2.3
Change the name of the device
With proper configuration, it is recommended that each time you connect the device and assigning
an IP address to carry out the following steps to change the name of the device
•
open the application DVK-300HD Chroma Key
•
select a device from the list of available devices.
•
select the Configuration button located at the bottom right of the main window
•
select the Change button in the Device info
•
set the device name and accept the settings via the Save button
The window for changing network parameters
Drawing 2.
Section setting the device name
Drawing 3.
The window for changing the name of the device.
Drawing 4.
DVK-300HD
7
Advertisement
Table of Contents
