Table of Contents
Advertisement
Post process
After the keying process there is a possibility to correct final result with post process.
The post process works per stream, not the global output. To use it first it needs to be enabled by clicking on Enable
checkbox.
Beside standard Brightness, Contrast and Saturation parameters, there are ambient controls.
It can be used to add to the anchor similar colour tone as loaded virtual studio to help the anchor to look more
natural.
To do this first the user need to choose the colour which is similar to main colour of the loaded set by clicking on
Ambient color square and picking it from colour dialog.
Then the only thing to do is to adjust the Intensity of the ambient colour.
Unnatural warm colours of anchor on set with blue colours only
The same anchor with some blue ambient added in post process.
It is worth to mention that the ambient settings can also help with spill suppression.
13
Advertisement
Table of Contents
