Grounding - Grizzly G1023S Instruction Manual

10" heavy-duty table saw
Hide thumbs Also See for G1023S:
Table of Contents

Advertisement

Grounding

In the event of an electrical short, grounding
provides electric current a path of least resis-
tance to reduce the risk of electrical shock. This
tool is equipped with an electric cord having an
equipment-grounding conductor which must be
properly connected to a grounding plug. The plug
must be plugged into a matching outlet that is
properly installed and grounded in accordance
with all local codes and ordinances.
Improper connections of the electrical-grounding
conductor can result in risk of electric shock. The
conductor with green or green and yellow striped
insulation is the electrical-grounding conductor.
If repair or replacement of the electric cord or
plug is necessary, do not connect the equipment
grounding conductor to a live terminal.
This equipment must be
grounded. Verify that any
existing electrical outlet and
circuit you intend to plug
into is actually grounded.
Under no circumstances
should the grounding pin
from
plug be removed. Serious
injury may occur.
-10-
Models G1023S110 & G1023S:
any
three-pronged
Extension Cords
We do not recommend the use of extension cords
with 220V equipment. It is much better to arrange
the placement of your equipment and the installed
wiring to eliminate the need for extension cords.
Should it be necessary to use an extension, make
sure the cord is rated Hard Service (grade S) or
better. Refer to the chart in Section 1: Safety
Instructions to determine the minimum gauge
for the extension cord when using either 110V
or 220V. The extension cord must also contain a
ground wire and plug pin. Always repair or replace
extension cords when they become worn or dam-
aged.
We have covered some basic electrical
requirements for the safe operation of your
machine. These requirements are not nec-
essarily comprehensive. You must be sure
that your particular electrical configura-
tion complies with local and state codes.
Ensure compliance by checking with your
local municipality or a licensed electrician.
G1023S/G1023S110 Heavy-Duty 10'' Table Saw

Advertisement

Table of Contents
loading

This manual is also suitable for:

G1023s110

Table of Contents