Table of Contents
Advertisement
VOICE DICTATION
By using the voice dictation function, you can input the text by speaking your words
instead of using the keypad.
1. Press the Left Soft key
Center Select key [OK].
2. Select the desired message type to send and press the Center Select key [OK].
3. Enter the email address or phone number in the "To" field and press the Center
Select key [OK].
Text
4. In the
the handset. Release the Voice Commands key
5. When entered text is correct, press the Center Select key [OK] to confirm. If
incorrect, amend the text by using the keypad. For details on how to use the
keypad, see page 60, "TEXT INPUT. "
• Voice dictation mode cannot be used when the Bluetooth® connection is in use.
• The voice dictation function supports US English only.
• Before using voice dictation, the phone should be trained by your voice.
TEXT TO SPEECH
READING OUT UNREAD MESSAGES WITh ThE FLIP OPEN
With the flip open, the handset reads out the text information with a synthetic voice.
1. With the flip open in idle mode, press and hold the Voice Commands key
- The handset reads out unread received messages one after another for you
with a synthetic voice.
2. Press the Left Soft key
currently being read.
3. Press the Center Select key [REPLY] to create a reply message for the currently
reading message.
48
C
[Message], select
field, press and hold the Voice Commands key
C
[Again] to go back to the top of the message
New Message
and press the
O
, and speak into
O
after one word.
O
.
Advertisement
Table of Contents
