Casio G'zOne Ravine C781R3 User Manual page 105

Train Voice
3. Select
To begin press the Center Select key [OK].
Train Voice: Requires that you make recordings of your voice to customize the voice
•
recognitions system. It will take a few minutes.
4. Wait for the beep and then repeat the sentences using your normal tone of
voice.
5. Repeat steps 1 - 4 when you are finished with a full session, you will reach a
screen that reads
PROMPTS:
Allows you to select the Voice Commands system characteristics.
1. Press the Center Select key [MENU], select
Center Select key [OK]. Select Tools, press the Center Select key [OK], select
Voice Commands
2. Press the Right Soft key
Select key [OK].
3. Select Mode, Audio
key [OK].
• Mode: Select the Voice Commands system mode from the following:
- Prompts: Read out Voice Commands prompts.
- Readout+Alerts: Read out and Alert tone prompts, dialing digits and
menus at the same time.
- Readout: Read out prompts, dialing digits and menus.
- Tones Only: Prompts you with a tone only.
Audio Playback: Allows audio playback to play through the speakerphone
•
or through the earpiece. Select
the Center Select key [OK].
• Timeout: You can control how long the system listens for a command
before timing out. Select
Center Select key [OK].
and press the Center Select key [OK].
Adaptation Complete.
then press the Center Select key [OK].
D
[Settings], select
Playback, or Timeout
Speakerphone
5 Seconds
Settings & Tools
Prompts and press the Center
and then press the Center Select
or Earpiece
10 Seconds
or and then press the
and press the
and then press
01
02 02
03
04
05
105