Casio G'zOne Ravine C781R3 User Manual page 131

2. Enter the four-digit lock code and press the Center Select key [OK]. The default
lock code is last 4 digits of your mobile telephone number.
Edit Codes
3. Select
4. Select one of the following options and press the Center Select key [OK].
• Phone Only: Allows you to edit the lock code for Security. The default lock code is the last
4 digits of your mobile telephone number.
Calls & Services: Allows you to edit the lock code for Restrictions. The default lock code is
•
the last 4 digits of your mobile telephone number.
Phone Only
5. If is selected, enter the new four-digit code in the
Code
field. Enter the new four-digit code again in the
field and press the Center Select key [SET].
Calls & Services
6. If
Code
field. Enter the new four-digit code in the
new four-digit code again in the
Select key [SET].
RESTRICTIONS:
Use the following procedure to configure Location Setting, Calls and Messages
restrictions.
1. Press the Center Select key [MENU], select
Center Select key [OK]. Select
Security
[OK], select
2. Enter the four-digit lock code and press the Center Select key [OK]. The default
lock code is last 4 digits of your mobile telephone number.
Restrictions
3. Select
4. Enter the four-digit lock code again and press the Center Select key [OK]. The
default lock code is the last 4 digits of your mobile telephone number.
5. Select one of the following settings and press the Center Select key [OK]:
• Location Setting: Select
• Calls: Select
Incoming Calls
Allow All, Contacts
and press the Center Select key [OK].
is selected, enter the current lock code in the
Re-enter New Code
Phone
then press the Center Select key [OK].
and press the Center Select key [OK].
Unlock Setting or Lock Setting
or Outgoing Calls
and press the Center Select key [SET].
Only, or Block All
Re-enter New Code
Enter New Code
field and press the Center
Settings & Tools
Settings, press the Center Select key
and press the Center Select key [SET].
and press the Center Select key [OK]. Select
Enter New
Enter Current
field. Enter the
and press the
01
02 02
03
04
05
131