Aligning Print - Printek 850 Series Operator's Manual

D A I L Y O P E R A T I O N

Aligning Print

When a new form is loaded into the printer for the first time, it may be
necessary to adjust where printing begins. If the print position needs to be
adjusted, the following discussion will describe how this is accomplished.
Note that the alignment for the selected form is permanently stored in the
printer's memory and does not have to be readjusted each time the form is
loaded.
To align print on a particular form, open the front lid and select that form
with the UNLOAD/CHANGE button and then press the ALIGN/ITEM button.
If the form selected were named "Invoices", the display would now show
the following.
Aligning Print
On INVOICES
After a short time, the display would change to:
ALIGN/ITEM MENU
On INVOICES
Press ALIGN/ITEM. Be sure to remember that you are moving where the
print is placed on the page.
Left/Right
0.00"
The UP/DOWN ARROW buttons will move the print left or right in 1/100
th
inch increments. Note that the left and right arrows will change according to
which way the print has been moved from the normal print position. The
maximum distance print may be moved is 9.99 inches in either direction.
2 9